Wednesday, November 6, 2019
Free Essays on Obsenity, Media Law
, images and gestures we either use or choose to ignore or avoid depending on what meaning we have adopted for these things into our own lives. As we look at the world from a myopic viewpoint you would think obscene images, ideas, paintings, writings, etcâ⬠¦ would easily stick out. However when you use a broader view of the world you realize that there are billions of people on the face of the earth, and each and every one of them has their own view and opinion and no two are exactly the same. This being the case what one may find obscene and improper, another may find acceptable, and let us not forget about all those who dwell in the infinite shades of gray on any given subject. Websterââ¬â¢s defines obs... Free Essays on Obsenity, Media Law Free Essays on Obsenity, Media Law Romper bomper stomper boo tell me tell me tell me do magic mirror tell me today which media law subject should my paper cover today? Why donââ¬â¢t we talk about f#@*%n obscenity? That sounds good to me. It also sounds like the magic mirror needs its mouth washed out with soap, this being just my opinion. Surprisingly the magic mirror has only displayed only one forum of what is considered obscenity. Obscene language is certainly one issue I feel I am surrounded by everyday, both as a user and a receiver, but there are also images and gestures which are considered obscene. Now an obvious image of obscenity is pornography, but surprisingly even the masters of art have been and some still accuse them of creating obscene images. Now I am not a prude by any stretch of the imagination, I have been known to use language that would make my mother slap the back of my head. I must say though that I use it in the confides of designated areas where it is more readily accepted. As we tell children as they grow up,â⬠you have an indoor voice and an outdoor voice.â⬠I would say, as we create our personality we have a selection of words and images we allow at different places and times. One of these selections of words and images contain obscene words, images and gestures we either use or choose to ignore or avoid depending on what meaning we have adopted for these things into our own lives. As we look at the world from a myopic viewpoint you would think obscene images, ideas, paintings, writings, etcâ⬠¦ would easily stick out. However when you use a broader view of the world you realize that there are billions of people on the face of the earth, and each and every one of them has their own view and opinion and no two are exactly the same. This being the case what one may find obscene and improper, another may find acceptable, and let us not forget about all those who dwell in the infinite shades of gray on any given subject. Websterââ¬â¢s defines obs...
Monday, November 4, 2019
Science and the Epidemiology of AIDS Essay Example | Topics and Well Written Essays - 1250 words
Science and the Epidemiology of AIDS - Essay Example To date low income nations are using the effects of the disease as strategies for intervention from industrialized nations and access to funds from donor agencies working hard to try and save millions of lives, leaving the questions open, "how far should aid go Is it true that donor agencies are using the situation for control of nations by manipulating the flow of aid" In 1983, prompted by the number of Africans living in Europe with clinical cases of AIDS, investigations began in Africa to determine the extent of the clinical problem of AIDS and transmission patterns in the region. What was of note to researchers was the nearly equal ratio of male to female cases of the disease with 90% having no high risk factors (Quinn 1986). In contrast, the industrial world exhibited higher cases in homosexual males and injection drug users. Over the proceeding two years, results from a studies done by Van der Perre P et , Vandepitte J et al and Serwadda D et al in Zaire (as cited in Quinn 2001), showed the presence of Aids in several urban areas in equatorial Africa. "Slim disease" was often the documented outward sign of the disease mainly prevalent in sex workers and their clients. This raised several discussions on the mode of transmission of the disease. It was not until the introduction of the test for HIV-1 was there greater understanding leading to be tter epidemiological study of the modes of transmission of the disease. The disease, considered endemic then, reached epidemic proportions in the 1970's and '80's with statistics for the year 1986 almost trebling the figures predicted by early researchers. Quinn's retrospective report (2001) shows just how far and fast the disease had ravaged the continent. Today one has only to get on the internet, watch the news or read a local paper to get a glimpse of the effects of the disease in Africa. It was evident as early as the 1980's that unless drastic measures were taken; Africa was losing her most productive age group to the effects of the aids epidemic. By 1987 statics listed by Sabatier in the article on Aids in the Developing World showed the highest number of new cases of HIV and AIDs were from central and eastern Africa with most of the cases being young sexually active adults both male and female in the age groups of between 15 and 40 years (1987 p 99 -103). In the same year the World Health Organization Aids Surveillance Report (as cited in Sabatier 1987) had statistics for over 40 countries, 36 reporting to WHO. It is difficult to get accurate statistics, as some countries are wary of the industrialized world especially after reports of scientific findings linking the origins of the disease to Africa. Over and above this, poor health delivery systems as well as lack of accurate demographic figures make it impossible to get accurate statistics. The modes of transmission are well documented and known to all, for Africa and the earliest recorded document being that of Quinn T.C, Mann J.M, Curran J.W and Piot P (1986). The main modes of transmission in African countries are mainly by heterosexual, blood transfusions as well as mother-to-child transmissions at birth or through wrong breast feeding practices (Sabatier 1987). This however does not discount the presence of gay communities on the continent. Gender, sexuality age and socioeconomic status play an important role in structuring vulnerability of a person to HIV infection. Ruganga A.O and Aggletoon P
Saturday, November 2, 2019
My aspirations and goals Essay Example | Topics and Well Written Essays - 500 words
My aspirations and goals - Essay Example This will further help me reach my aspirations and goals. The experiences I have obtained in being part of a modified and varsity team member have given me the opportunity to be part of a team, learn what it is to be a team member, and excel in my leadership skills. Learning that you are not a one ââ¬Å"shotâ⬠person has improved my style of playing as a team member and succeeding in games where at times we knew that we were going to face a challenge playing against another team. I am an appreciative person and I want to give my parents and the community a present. The present will be to wholeheartedly put my efforts as a high school and college student and be in a position where they will be proud of me. For my parents, it will be completing what I have formed my aspirations to be. For the community, it will be becoming an expert in my field and delivering sportsmanship requirements. I want to take the opportunity of traveling and be able to share customs, cultures, history, and traditions given the sports arena. I want to learn what other students are doing in their countries assuming leadership roles in sports. I want to be able to assume leadership roles in other countries and share my experiences in hockey. By sharing these experiences, we will be in a better position to find out what our similarities and differences may be, find out ways in which we are better able to help each other according to our needs, and work with national and international varsity teams. I want to work as a volunteer and continue to assume leadership roles, where I may be able to help other youngsters become involved in hockey activities and as a player. Sports is generally not an area where funding takes place. I am therefore, interested in a scholarship that will help me in my formative years to be able to reach my goals in a higher education institution as a student in __________
Thursday, October 31, 2019
James McNeil Whistler Research Paper Example | Topics and Well Written Essays - 250 words
James McNeil Whistler - Research Paper Example Scale of work describing James McNeil Whistler can be said to be small scale, probably explaining the apparent reason of his dismal following. However, there is an important attribute that can be spotted in his work; his untold legacy that influenced the artistic world forever (Rutter 113). Personally, I have a rare liking for pieces of art by James McNeil Whistler as well as his deep passion for art. It is evident that he would spend a fortune in a legal procedure fighting for a better description of his art work, to depict the soft part he had for art (Block, 2000, p94). His honorary awards and memberships into famous world art forums further attest to this. I certainly enjoy the art depicted in his pieces. On the other hand, as a critic, I obviously would never fail to criticize his undefined scope of art. Clearly, the missing link to his popularity squarely lies in over optimism to tackle every life topic in the limited platform of art. There is a backward feature in his character I that he was arrogant, and insubordination to his patrons, which certainly contributed to his
Monday, October 28, 2019
Inaugural Speech Rhetorical Analysis Essay Example for Free
Inaugural Speech Rhetorical Analysis Essay John F. Kennedyââ¬â¢s inaugural speech is certainly one to remember. Itââ¬â¢s memorable not for its length, but for the effective content that it beholds. He entices readers by the use of strong rhetoric techniques. His inaugural analyzes style of writing, such as diction, tropes, schemes, and syntax, and applies the concept of it effectively throughout the speech. A reader performs rhetorical analysis to examine how authors attempt to persuade their audiences by looking at the various components that make up the art of persuasion. Moreover, it is most essential to be able to understand the relationship among the speaker, subject, and audience, which President Kennedy adequately exploits in his speech. It is a necessity to be able to identify the speaker, subject, and audience in a piece of writing, such as John F. Kennedyââ¬â¢s inaugural speech. The ethical appeal, instead refers to the credibility, character, and confidence of a writer. There are a number of ways in which an author may establish ethical appeal. During the time period in which it was written, cold war tensions were still lingering the atmosphere and Kennedy had just won the position as president in a very close election over an accomplished opponent. Therefore, the nation is vulnerable and tense and has reached a turning point in history. The speaker would be classified as the narrator, which in this case is John F. Kennedy. Since he was elected president, the audience views him as an authoritative figure whose speech should be respected. Although Kennedy was young, he still faced critique on his tone and image, whether that be physical or mental. His speech was not aimed toward any particular individual, it was written for the world. So, it was expected of him to exhibit hope, compassion, strength, and loyalty. The speaker, subject, and audience all depend on each other in a piece of work because without them, it would be difficult to identify what the writing is talking about and who would be affected by it. Within President Kennedyââ¬â¢s speech, he utilizes various rhetorical strategies, including diction, tropes, syntax, and schemes, which make it more effective and versatile. For instance, parallelism such as the statement, ââ¬Å"whether it wishes us well or ill, that we shall pay any price, hear any burden, meet any hardship, support any friend, oppose any foe,â⬠gives flavor to the speech by pointing out opposite words within a single sentence but still making it work. A few antimetaboles are used in the speech, such as ââ¬Å"let us never negotiate out of fear. But let us never fear to negotiateâ⬠and ââ¬Å"ask not what your country can do for you, ask what you can do for your country,â⬠make the speech more effective by twisting around the order of the words, or syntax, to get people to realize a point. Additionally, what makes Kennedyââ¬â¢s speech so effective is that he can transition from a simple sentence to a more complex, meaningful one in a matter of lines of the speech. In accordance to the diction, the words in his speech (freedom, poverty, devotion, and loyalty) are considered abstract. This is because they all convey a tone of desire and significant qualities held by friends. They strengthen and add more feeling to the speech as well. However, the archaic words, such as writ and forebears, are used in a manner to bring in the old language as well as the new, therefore there is sophistication as well as understanding. Kennedy also uses juxtaposition when he says, ââ¬Å"peaceful revolution,â⬠and this adds spice to the speech because of the contradiction of the two powerful words. Yet another effective rhetoric strategy that he uses is hortative sentences, such as ones using the phrase ââ¬Å"let usâ⬠or ââ¬Å"let both sidesâ⬠, which urges action and attention to the audience the speaker is writing to. Clearly John F. Kennedy has made remarkable use of various rhetorical strategies throughout his inaugural speech, which in turn allows one to develop a superb rhetorical analysis with the different components of the text. His speech is an effective piece of writing because of its style, diction, syntax, tropes, and schemes. Additionally, it all goes back to the understood relationship between speaker, audience, and subject as well as the classical appeals.
Saturday, October 26, 2019
Cracks Detection using Digital Image Processing
Cracks Detection using Digital Image Processing Cracks detection using digital image processingÃâà in MATLAB Usually visual investigation methods have been used for inspection and monitoring of concrete infrastructures. Huge and tall structure such as cables bridges, high rising towers, dams and industrial power plant are known to have an inaccessible area and limitations in inspection field due to its geometry structure which is often dangerous , labor -intensive and involves lot of risks. So, with rapid development in technology and its uses, researcherÃâà are trying to overcome these problem. Every now and then some research is going regarding these problem and trying to overcome it. So, I also have come with the idea of using digital Image processingÃâà in mat lab to detect the cracks in such structure. LiteratureÃâà Review:- AsÃâà of todays world, digital Image processing is getting better and betterÃâà and used in all areas of science. WithÃâà the help of digital image processing tools, various image processing can be applied to detects the cracks in structure. Not only in structures but also forÃâà bridges, towers, power plant and also in structureÃâà like steel ,roads, fatigues and sewer pipes. A number of research studies have been conducted regardingÃâà detection of cracks by using DigitalÃâà image processing .(1)The author of Korea InstituteÃâà combines UAV technology in the process of recent breakthroughs and digital image analysis techniquesÃâà to detect cracks in structure. In this study, the crack detection program with digital image analysis techniques was developed in order to the crack and width of the structure automatically. The developed program attempted to perform the image analysis for crack detection with Morphology method based morphological hydraulics and specially designed Morphological link for crack(Morph link-C)algorithm for S/W development was applied to the program. The digital image was acquired in order to evaluate UAV applicability and performance and field application of the crack detecting program after targeting the bridges in common use. Comparing with the measured values in order to verify reliability of the new structural inspecting system for application in this study, it is verified that the accuracy above a certain level is secured. Also, The below three core technologies shall be considered to develop the technology possible to detect cracks and calculate crack width of large structure through the digital image analysis and to put this technology to practical use. Optimal digital image acquisition and filming equipment configuration Crack analysis technique of a number of mass digital images Combining technique of multiple images that different positions are captured And also the author from china(2)Ãâà Ãâà proposedÃâà inspection system for measuring cracks in concrete structure and providing objective crack data to be used in safety assessment. The system consists of the mobile robot system and crack detecting system. The mobile robot system is controlled to keep a constant distance from the wall to acquire image data with a CCD camera on scanning along the wall. The crack detecting system extracts crack information from the acquired image using image processing. To improve accuracy of crack recognition, the geometric properties and patterns of cracks in a structure were applied to image processing. Also,Ãâà an inspection system using an image process, which can be a solution to the problems of crack detection in concrete structure, slow rate, subjectivity, and the inefficiency in managing data. Also, the system ensures the validity and possibility based on the experiment in the indoor structure, road tunnel, and subway tunnel. However, an erroneous recognition of a crack as non-crack and vice versa prevails. Therefore, the system is semi automated to get rid of wrong recognition of non crack as crack, and to identify crack by a graph search method using the user-based input of the start point and end-point of crack. In order for a crack inspection system to develop into an expert system, there needs to be further study of the characteristics of cracks and the algorithm must move towards complete automation. Similarly,(3) The Komatsu Engineering Company has developed and commercialized an image acquisition system that can acquire the images of road and tunnel lining by using a laser-scanning device .(4) The Railway Technical Research Institute in Japan developed an image acquisition system of railway tunnel lining by using line CCD cameras. (5)Road ware Group Inc., Canada commercialized a system that acquires an image of the road with a CCD camera, an ultrasonic sensor, and a gyro-sensor with a speed of80km/h and a resolution of 3~4cm [7]. Those systems are useful to collect data of cracks, leakage, scale, and spall but only by using the image acquisition, and not through automatic defect detection. The algorithm for crack detection and measurement is required for fully automatic inspection system. It is necessary, therefore, to develop the automatic crack detection and measurement algorithm to obtain both fast inspection and objective crack data. From the author of University of central Florida , paper describes the mechanism of non-destructive bridge inspection methods using HRDI and HDV digital crack detection and IR thermographÃâà technology and the benefits of the combination thereof. The feasibility of applying these technologies for in-service bridge inspections are demonstrated and evaluated in the State of Florida underà the university-government-industry collaboration research program. The purpose of the joint research effort is to utilize the innovative technology for more efficient bridge inspection programs and bridge management in Florida by developing a new quantitative performance measure for long term bridge monitoring, such as crack ratio and delaminated area, and the use of objective data resulting in more efficient and scientific bridge inspection database and management system. With the quantity of roadway structure assets increasing annually, coupled with concurrent increasing rates of deteriorati on being experienced by many of the existing structures, bridge owners need to find new and creative ways to ensure the structural safety of their bridges while they all too often face problems of reduced budgets and dedicated bridge inspection resources. Currently, the determination of bridge condition ratings inà many countries is generally subjective depending on individual inspectors knowledge and experience, as well as varying field conditions. For the evaluation and documentation of concrete deterioration (cracks, efflorescence, delaminating, spalls, etc.) and changes overtime, the current practice of visual inspections can be lacking in accuracy and completeness, as well as time consuming and costly if road closures and access equipmentà are required for the inspection. Using the proposed new non-destructive technologies, bridge engineers can quickly and efficiently obtain objective current bridge condition information that has traditionally been obtained by more time con suming and more subjective close-up visual inspections and sounding tests. The digital output of these NDE inspection techniques improves on-site inspection safety and objectivity and contributes to improved inspector efficiency by significantly reducing the amount of inspection time in the field. However, it must be noted that while most of the NDE or sensor technologies do offer new efficiencies and/or additional objective assessment results to the bridge inspection process, they are not a substitute for inspectors conducting on-site specific follow-up and detailed structure investigations. While improved efficiencies in bridge inspection methods resulting from the application of the above NDE technologies bring significant benefits to the overall bridge inspection process, they are not a substitute for the continued need for sound and experienced engineering judgment. The authors believe that by offering new and improved inspection technologies to experienced bridge engineers and inspectors, bridge inspection programs will be strengthened through enhanced inspection data and will be more objective, consistent, scientific, and efficient. Based on the nature of calculationÃâà and development of technology approach to process image, Image Processing Technique for crack detection can be divided into several categories. Each image consists of pixel which are represented by its integer values from 0 to 255. Based on these pixel values Operation technique conducted is accomplished in the spatial domain. However , desirable outcome cannot be obtained in spatial domain. So in this case ,usually Fourier or wavelet transformation is performed on the image. Again, the outcome image is processed in frequency domain. After wise, to reconstruct the image in spatial domainÃâà an inverse transformation is applied. Another procedure to detect cracks using image is based on the training algorithm to solve a problem. In this process ,some technique directly deal with image without any training while other first constructÃâà a database which is divided into two subsets, the subset with crack image and subset with un-cracked images. For each subset ,a decision line is defined to represent the characteristics index, such as shape factor. With the help of these image , a program is used which is capable of comparing new images with decision line and assign it to the subset where it belongs. Especially Neural network and clusteringÃâà method are widely used among the popular training techniques to learn the decision line. Basically, two approaches have been applied to detect cracks from the images.Ãâà Using dye solution and the other is without using dye solution to the surface material. Usually ,In this dye based detection process, a particular dye solution such as fluorescent is injected on the surface of concrete or other material. Depending on the solution typeÃâà and color special or ordinary cameras are used to scan the surface of the material. These dye based method were used in past for detection of mini or micro cracks in different types of material like concrete ,ceramics tiles etc and also any kind of structure. The other approach for finding crackÃâà is based on the color image without using dye solution. Since these method is less costly and less time consuming it is currently more popular. A number of research studies have been conducted regarding the surfaceÃâà crack detection technique in different material. One of these attempts can be seen in work of Kittler at al. They proposed an idea of training based algorithm to get samples of the region, which are void of defects in the spatial domain. In this process, the new pictures were analyzed for the presence of any defects and also to find the location of the defects. In this method, clustering technique and morphological operation were performed to analyze the images. The experimental output of this method is shown in the figure below. Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Figure . Crack detection on ceramic tiles (Kittler, Marik, et al. 1994) Image processing technique has been used for inspection of cement based materials for micro cracks and other micro defects (Ammouchea at al 2000). In this process, a red dye solution is used with the surface. So the dye solution can penetrate the porous region of the surface while the excessive solution areÃâà removed by polishing the sample surface. Once the dye solution is injected, a color image of 256 x 265 was taken from camera of the surface. The following operation is carried out on the taken image. O(x,y) = max { R(x,y)0 G(x,y) } Where, O(x,y) à ¢Ã¢â¬ ââ¬â¢ Intensity of the output gray level image at (x,y) co-ordinates R(x,y) à ¢Ã¢â¬ ââ¬â¢Ãâà Intensity of the original image at (x,y) co-ordinate in red region. G(x,y) à ¢Ã¢â¬ ââ¬â¢Ãâà Intensity of the original image at (x,y) co-ordinate in gray region. Afterward, using a thresholding value, the gray levelÃâà image is converted to the binary image. Then, using entropy maximization method value of the thresholding is evaluated. This method is based on maximization of the entropy function à ¡Ã ´Ã¢â¬Å" of gray level pixel. à ¡Ã ´Ã¢â¬Å"(k)=Ãâà [Ãâà Ãâà ] where, Pà ¡Ã µÃ ¢ is the probability of a given pixel to have an intensity of i (Pà ¡Ã µÃ ¢=Nà ¡Ã µÃ ¢/N) Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ni Number of pixel having i intensity Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà N Total no of pixel Ãâà Ãâà Ãâà Ãâà Ãâà Wà ¢Ã¢â¬Å¡Ã¢â¬â¢ W1 Lower and upper bound of the probability to find pixel intensity And also computed as:- Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà k Based on the threshold to obtain binary image, a lower bound thresholding operation is performed. Then , using two morphological operations of eroding and rebuilding the binary image is post processed. This operation is conducted to eliminate noisy and small objects (i.e. Less than 10 pixel) from the image. However, second series of operation are needed to obtain the shape factors which are used to decide whether the pixels in a binary image are associated with cracks or other defects. To do so, a dimensionless packing density index Fc is defined. Fc = (2-4) Where, Aab=Object area Aac= Area of its circumscribed circle The value of Fc is equal to 1 for a circle and tends towards 0 for a very elongated object.Fig below shows results obtained in this method Fig. Also, Abdel-Ghader (_Abdel,Osama and kelly 2003) proposed an idea to find cracks on concrete surface using image processing technique .In this work, they implementedÃâà and compared 4 cracks detection methodÃâà which include FastÃâà Haar Transform( FHT), Fast Fourier Transform( FFT),Sobel edge detectorÃâà and canny edge detection. They used 50Ãâà concrete image from a bridge deck of which 25 pictures with cracks and 25 pictures without cracks forÃâà their research .From their research ,they concluded that FHT was more efficient and effective method rather than other 3 method. Basically, FHT, a simplifiedÃâà Wavelet transformation decomposes the image into low and high frequency components, the mother Wavelet à ¡Ã ´Ã ª(t) of Haar function and scaling à ¡Ã ´Ã¢â¬Å"(t) are defined as: à ¡Ã ´Ã ª(t) = Ãâà Ãâà Ãâà Ãâà Relationship between Haar wavelet and scaling function and scaling function with itself is shown below Ãâà Ãâà Ãâà Ãâà Ãâà à ¡Ã ´Ã ª(t)=) Ãâà Ãâà Ãâà (t)=) In this process, to detect crack the three quadrants of the first level transformation i.e. 2,34 are passed through a high pass filter to reduce nose andÃâà combined together to get magnitude of images. To decide whether crack exists or not, an empirical thresholding value is used. FastÃâà Fourier transfer motion (FFT) are used to derive the frequency component of the image intensity. The transformation andÃâà the inverse transformation were carried out using: F(u, v)= F(x, y)= The canny edge detection is a convolution filter to detect filter noise from the image while processing. In addition, thresholding value is defined to see if a pixel belongs to an edge region or not. TheÃâà Sobel edge detection is also a convolution filter defined for vertical and horizontal edges in images. This edge detection technique helps to detect the change in the image intensity in neighboring pixels. Filtering was done using convolution operation for each filter separated. Then, two filtered images is combined together at each location and result is a gray level image with enhanced edges. G x = Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà G y= Default value of thresholding is defined asÃâà Ãâà Ãâà where Another attempt to detect cracks in concrete specimen using optical fluorescent microscopy can be found inÃâà this research( LitorowiczÃâà 2006). To continue these processes, a fluorescent dye solutionÃâà was used. The specimens were then light using Nikon optical microscope at a magnification of 10 times. The images were captured using a Sony DXC 350 P video camera. Then, image pro Plus analysis software was introduced to perform the image processing operation. Then, using segmentation method, the RGB images is connected into a binary image. The threshold level was calculated based on the effect of the dye solution to the surface. To distinguish cracks pattern, several parameters were introduced: Angle between the vertical axis and the major axis of the ellipse coveringÃâà the connected component Area of each connected component DendriticÃâà length, which is the total length of all the one-pixel thick branches. Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà 4. Area ratio (i.e. of the area of the counted object and the entire area of the active image.) Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà 5.Radius ratio (i.e. The ratio of maximum radius and minimum radius for each connected component) Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà 6. Roundness using perimeter 2/4à â⠬2 x Area. Intelligent crack detection on the concrete crack image using neural network was proposed in Moon and Kim paper (2011). This research was conducted to develop an automatic detection system that analyze the concrete surface and visualize the crack more effectively and efficiently. Basically this research consists of two parts: Image processing and image classification. First stage include image processing tools like filtering, subtraction and morphological operation in order to extract cracks from the background image (i.e. data such as the number of pixel and the ratio of major axis to minor axis for pixel area. While in second step, existences of cracks are identified using neural network to automate the image classification. In this process, 105 images (cracked and non-cracked) of concrete were used as a trained image including every kind of cracks. Following steps were carried out for image processing : Fig. Image processing stepsÃâà to detect cracks First step in image processing is to convert RGB image into gray level intensity image followed by a subtraction transformation as follows: à °Ã à à ¼Ã °Ã ââ¬Ëà (à °Ã ââ¬Ëà ¥Ã °Ã ââ¬Ë- ) = à °Ã ââ¬ËÃ
¡Ã °Ã ââ¬ËÃ
½Ã °Ã ââ¬Ëà ¥ {à °Ã ââ¬ËÃ
¡Ã °Ã ââ¬Ëââ¬â¢Ã °Ã ââ¬Ëââ¬Ëà °Ã ââ¬Ë-à °Ã ââ¬ËÃ
½Ã °Ã ââ¬Ëâ⬠ºÃ °Ã ââ¬Ëà ¥Ã °Ã ââ¬Ë-à °Ã Ã
â-à °Ã ââ¬Ëâ⬠¦Ã °Ã ââ¬Ë- [à °Ã à à ¼(à °Ã ââ¬Ëà ¥Ã °Ã ââ¬Ë- ) à ¢Ãâ ââ¬â¢ à °Ã à à ¼(à °Ã ââ¬Ëà ¥Ã °Ã ââ¬Ë- )], 0} Where ,I(xi)Ãâà and I(xj) areÃâà the intensity pixel of xi and X j respectively. Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ri Neighborhood of that pixel xà ¡Ã µÃ ¢ . When the subtraction is negative number, it is represented as zero. Once improved subtraction method is used, threshold value is defined to detect cracks more effectively. The thresholding operation is given as: à °Ã à à ¼Ã °Ã à à ¼Ã °Ã ââ¬Ëà (à °Ã ââ¬Ëà ¥, à °Ã ââ¬Ëà ¦) = {2 ÃÆ'- à °Ã à à ¼Ã °Ã ââ¬Ëà (à °Ã ââ¬Ëà ¥, à °Ã ââ¬Ëà ¦) à °Ã ââ¬Ë-à °Ã ââ¬Ëââ¬Å" à °Ã à à ¼Ã °Ã ââ¬Ëà > à °Ã ââ¬Ëâ⬠¡ Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà à °Ã à à ¼Ã °Ã ââ¬Ëà (à °Ã ââ¬Ëà ¥, à °Ã ââ¬Ëà ¦)Ãâà Ãâà Ãâà Ãâà Ãâà à °Ã ââ¬Ë-à °Ã ââ¬Ëââ¬Å" à °Ã à à ¼Ã °Ã ââ¬Ëà à ¢Ã¢â¬ °Ã ¤ à °Ã ââ¬Ëâ⬠¡ To further smooth the image, a Gaussian law pass filter was applied. Then, an input gray level image is converted to a binary image where the values are represented as 0 or 1. Using OtsusÃâà method or valley emphasis method, the threshold value was selected. Morphological image processing including closing andÃâà labeling were applied to the image to extract image component such as shape of crack. The optimal parameters and their level associated with above operation areÃâà mentioned below: Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Fig. Parameters and their levels Using Artificial Neural Network (ANN) crack images were distinguished from non-cracked images. Also images were automatically identified as the crack or non-cracked images using ANN. The output value was represented either cracked (value 1) or non-cracked (value 2). Another example of tracing based image processing technique can be found on Nishikawa research paper (2012). A robust automated image processing method was applied to crack detection on concrete surface. This method consists of two parts: First part consists of automatic construction of a filter for crack detection while the other part consists of noise removal and determination of indistinct cracks using iterative process. Using generic algorithm the part is conducted, where genetic individuals was represented as a tree structure. Using a trainedÃâà program, a large number of images were combined and several images filtered were converted into a tree structure. An illustration of tree structure concept is shown below. Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Ãâà Fig. Construction of Tree structureÃâà with multiple filters(Aoki and Nagao 1999) A combination of generic program was computed to train the program and results were compared to the target image (i.e. image generated by visual inspection. The comparison was between the distinct distributions of brightness between the images. To measure the filter performance the following formula was used. E= Where, Ãâà N- No of training images in database K-th target image -Output image -weighted image . -Ãâà Brightness of the weighted image in crack region )- brightness of k-th target image at position (i,j) To reduce the false negative result, a superimposition operation using low resolution image was implemented. Figure below shows the algorithm used in above algorithm. { algorithm}
Thursday, October 24, 2019
Last Exit to Brooklyn :: essays papers
Last Exit to Brooklyn Last Exit to Brooklyn is a very violent film. In fact, the filmââ¬â¢s purpose is to have the audience look at the whole question of violence. The film shows, in a very realistic way, the psychological, verbal and physical violence that permeates a Brooklyn neighborhood in the midst of a bitter strike during the 1950s. The film is based on the book, Last Exit to Brooklyn, by Hubert Selby, which was banned for its violent and sexually explicit content. Verbal violence is very prevalent in this film. People swear at and verbally abuse one another throughout the movie. Everyone seems angry. There are several causes for their anger. First the film takes place during a strike. Many of the characters are unemployed and have little money. They resort to drinking and drugs that feed into their societyââ¬â¢s violent tendencies. In one scene, the workers who are on strike are screaming obscenities at the scab workers and the boss. But in virtually every scene there is verbal violence. In every scene someone is being threatened, belittled, embarrassed or humiliated. The verbal violence is so punishing because behind it is the possibility of physical violence. Physical violence is also very common behaviour in the movie. For example, the very first scene shows a violent altercation between three soldiers and a gang of local thugs. Physical violence is the fundamental way in which the whole society behaves. The men use it to show that they are ââ¬Å"macho,â⬠so they beat up those who are weaker than they are, especially women. For example, Vinnie, the leader of a street gang, physically and verbally harasses a young prostitute named Tralala. In the most violent, nasty, and horrible scene in the movie, Tralala is gang raped and beaten by over a hundred men in a garbage dump. Many of the men in the film are homophobic and sexually insecure, and they act out their hostility and insecurity by beating up gays. They have problems at work and go out on strike. But their strike is full of violent incidents: they get into fist fights, they blow up trucks, they beat up cops. Whenever they have a problem, they use violence to deal with it. Psychological violence, that is, intimidation or the threat of violence, is also an important element of this film. Vinnie is a gang leader who uses psychological violence to control and manipulate his gang and other people in the neighborhood.
Subscribe to:
Posts (Atom)